How To Measure For A Dressage Saddle Ideas

How To Measure For A Dressage Saddle Ideas. Then place the flexible curve on your horse’s withers behind the chalk mark as shown in the picture below. If you can picture a deep dressage saddle seat, and a very flat jump saddle seat, to obtain the same cantle to nail measurements we would either need to aesthetically move the cantle nail or badging, which then wouldn’t have a function, or a rider would then need to remember that they are a size “18” in dressage, a size “16” in jump, as a rider would then need each discipline.

17″ Black Country Eloquence Dressage Saddle *Wide Tree from www.finelinetack.com

Set the saddle down on a saddle rack so it’s positioned as if you’re going to ride it. Most saddle pads have two or three measurements. If the points are parallel to his body or within 10 degrees of parallel, the tree is the correct width for the horse.

You Would Start By Placing The Tape Measure (At Mark 0) In The Centre Of The Saddle Badge/Head Nail And Measure To The Centre Of The Cantle.

Dressage saddles are designed to allow the horse to move freely. I grab a 52 when i dont know what i'll need. Length, width, and sometimes thickness.

Check The Product’s Description Before Buying The Good.

If the points are parallel to his body or within 10 degrees of parallel, the tree is the correct width for the horse. With the saddle in place on the horse, freeze instructs us to look at the angle of the points in relation to the angle of the horse's body. The thickness of a pad can come in different forms.

English/Dressage Saddles Are Measured Differently In The Seat;Flap Length & Angle The Next Part Of The English Saddle You’ll Want To Fit Is The Flap Of The Saddle.for The Rider, The Saddle Should Allow Approximately 4” Between The Swell Of The Saddle And The Front Of Your Body, And Your Seat Should Fit To The Base Of The Cantle But Not Push Against The Back.for This Step, All.

So, if you ride a 15.5” western saddle, you will likely need a 17.5” english saddle. Your feet are flat on the floor. Then place the flexible curve on your horse’s withers behind the chalk mark as shown in the picture below.

For Most Adult Size Saddles This Will Be About 17.

Most saddle makers provide their customers with detailed guidelines on how to measure a saddle seat size. 7 rows a good rule of thumb is that an english saddle seat size will run around two inches larger than a western saddle. To measure for a western saddle, measure the circumference of your thigh about 4 inches below your hips.

Use A Measuring Tape And Measure From The Center Of The Button On The Pommel (Front Of The Saddle), To The Middle Of The Cantle (Rear Of The Saddle).

Measure across barrel (belly) of the horse from the middle billet hole on one side to the corresponding billet hole on the other side. To measure the seat of an english saddle, measure from one of the ‘nails’ to the left or right of the pommel, straight back to the center of the cantle. Either mail the tracing to us:

Leave a Reply

Your email address will not be published.